Here you can find the default IP address and the username and password for the user interface of the ASUS RT-N12HP Wireless-N300 3-in-1 router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
The ASUS RT-N12 300Mbps wireless-n router provides 30,000 sessions for high speed downloads. 4 SSIDs support allows you to manage bandwidth and network access for different users in your network. In order to reset the ASUS RT-N12 to its factory settings 1. Find the reset button on the rear of the router 2. Press and hold the button for more than 5 seconds. The default factory settings are: Default username: admin Default password: admin Enable DHCP: Yes Default IP address: 192.168.1.1 Default subnet mask: 255.255.255.0 Default DNS. Home; ASUS; RT-N12 D1; Default settings of the ASUS RT-N12 D1. Here you can find the default IP address and the username and password for the user interface of the ASUS RT-N12 D1 Wireless-N300 3-in-1 router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of.
192.168.1.1
admin
admin
Asus Rt N12 Set Up
Preconfigured Wi-Fi settings
ASUS
<blank>
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the ASUS RT-N12HP, you have to do the following steps for access:
- Switch on router
- Connect the device via Wi-Fi* or a network cable with the router
- Open web browser
- Enter IP address in the address bar and then confirm with ‘Enter’ key
- Enter username and password in the open interface and confirm once more
* Make sure that your router’s Wi-Fi is activated.
Reset default settings
Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
Asus Rt N12 Router Password
To reset the ASUS RT-N12HP to its default settings, you have to do the following steps:
- Turn on router
- For at least 6 seconds, press the Reset button
- Device is automatically restarted
- Router has been reset to factory settings
Execute software reset
With the ASUS RT-N12HP, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.
After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.
Here you can find the default IP address and the username and password for the user interface of the ASUS RT-N12 C1 Wireless-N300 router. In the bottom part of this site, you will find a manual for accessing the router’s user interface.
Login data for the user interface
192.168.1.1
admin
admin
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the ASUS RT-N12 C1, you have to do the following steps for access:
- Put router into operation
- Connect the device and router
- Open web browser
- Enter IP address in the address bar and then confirm with ‘Enter’ key
- Enter username and password in the open interface and confirm once more